Single-Push Sintering Furnace Is Suitable For High Temperature Calcination Or Sintering Process Of Advanced Materials Such As Powder Materials, Zirconia Ceramics, Alumina Ceramics And So On.
※ Equipment Use
It is suitable for high temperature calcination or sintering process of powder materials, zirconia ceramics, alumina ceramics and other advanced materials.
※ Equipment features:
1. Temperature stability and uniformity
During the sintering process, temperature stability and uniformity are crucial to the quality of the final product. According to the information provided, some sintering equipment adopts a unique control mode and reasonable power distribution to ensure the stability and uniformity of temperature to reach the ideal state. This design can greatly improve the quality of sintering, because the uniform temperature distribution helps to reduce the stress inside the product and improve the density and mechanical properties of the material.
2. High efficiency and long life
The efficiency and life of sintering equipment directly affect the cost and sustainability of production. Some high-end sintering equipment chooses efficient heating elements, such as U-shaped silicon molybdenum rod heating in the high temperature area, and equal diameter resistance wire rod heating in the low temperature area. This choice not only takes into account the needs of the product sintering process, but also takes into account the characteristics of the heating element itself, thus achieving the goal of high efficiency and long life.
3. Energy saving and environmental protection
Modern sintering equipment pays more and more attention to energy saving and environmental protection. For example, some devices use lightweight insulation materials with high thermal resistance and low heat storage, as well as fire-resistant fibers or firebricks, which can speed up the rise and fall of heat while maintaining good insulation performance and reducing energy consumption. In addition, the advanced control system also helps to achieve scientific management and further improve energy efficiency.
4. Security and ease of use
Safety is a basic requirement for any industrial equipment. Modern sintering equipment is usually equipped with modern safety features, such as power failure protection, over-temperature sound and light alarm and emergency braking system, to ensure the safety of operators and equipment. At the same time, the device is also designed with ease of use in mind, such as the simplified and traditional Chinese MMI operating interface and artificial intelligence software control, so that users can easily operate and monitor.
※ Design and Manufacture certification:
1. The indicators are designed and manufactured according to the national standards of industrial furnaces
2. Conduct the performance test of various components and issue a report (support customer on-site pre-acceptance)
3. The export of equipment meets the international standards for export.
技术参数Technical parameter
| No |
Equipment type |
GTB0-*** |
| 1 |
Maximum temperature |
1700 ℃ |
| 2 |
Temperature control accuracy |
At 1℃, it is controlled by imported single intelligent regulator |
| 3 |
Temperature control points |
blackjack |
| 4 |
Main propeller |
Hydraulic cylinder propulsion |
| 5 |
Hold in esteem |
≤6T |
| 6 |
Mainly push the working speed |
300-700mm/h continuously adjustable |
| 7 |
Furnace height |
400mm |
| 8 |
Furnace length |
14250mm |
| 9 |
Pusher size |
270x270x40mm(W x L x H) |
| 10 |
pusher |
Corundum mullite |
| 11 |
Maximum heating power |
Approximately 210Kw |
| 12 |
Exhaust emission |
According to the technological characteristics, several stacks are set for discharging organic matter and adjusting furnace pressure. Multiple sets of chimneys are provided in the cooling section for auxiliary cooling. |
| The length of temperature zone, temperature control point and furnace width and height can be customized according to customer's process requirements |
Your message must be between 20-3,000 characters!
