※ Product Introduction:
This equipment is suitable for the spherodizing annealing, softening annealing, complete annealing, stress relief annealing, normalization, recarbonization heat treatment of low and medium carbon steel, low alloy steel and other wire, plate element, sheet steel coil, bar steel, steel pipe, forging and casting.
※ Product Features:
1. Computer monitoring, automatic abnormal action detection and display alarm.
2. Automatic material entry and exit.
3. Automatic and manual control.
4. Carbon potential control, using infrared I/R control technology
5.RX gas conversion furnace adopts the latest dewpoint control system to effectively and accurately control the purity of the protective gas
6. Protective gas flow control.
7. Power and gas, nitrogen flow monitoring and calculation,
8. The software and hardware of burners and monitoring systems of world-renowned professional brands are adopted.
9, the use of heat exchanger, so that the waste heat discharged to heat the combustion air to 300 ° C (about the value), can save 10-15% of the gas consumption
10. The automatic and safety system of the burner adopts the world famous professional brand
11. After the exhaust gas recovery of this furnace type, it can dry the nodulated wire after pickling (optional)
※ Design and Manufacture certification:
1. The indicators are designed and manufactured according to the national standards of industrial furnaces
2. Conduct the performance test of various components and issue a report (support customer on-site pre-acceptance)
3. The export of equipment meets the international standards for export.
Technical parameter
| brand |
CAILONEN |
Rated power |
Based on customer needs |
| Heat treatment type |
anneal |
voltage |
380V |
| Phase number |
three-phase |
Rated temperature |
950 ℃ |
| Operating temperature |
0-950 ℃ |
Furnace size |
Based on customer needs |
| Furnace temperature uniformity |
±5℃ |
Temperature control accuracy: |
±1℃ |
Your message must be between 20-3,000 characters!
